T20-100 pro ozubený řemen (106 × 160 mm)
Clamping Plate
Price without VAT: 174.36€
Price including VAT: 210.98€ with VAT
Catalogue price excluding VAT:
177.90€
The product is custom-made from a semi-finished product. It cannot be returned or replaced. In accordance with the provisions of § 1837, letter d) of Act No. 89/2012 Coll., the Civil Code (hereinafter referred to as the “Civil Code”), the consumer may not withdraw from a contract of purchase in the sense of the provisions of § 2079 et seq. of the Civil Code, if it concerns a contract on delivery of goods that have been adjusted by request of the consumer or for the consumer, concluded by means of remote communication.
In stock: no
Clamping Plate Parameters
Multiple belts: profile – no. of ribs. Caution! The number of ribs refers to the number of belt protrusions = the number of teeth on the pulley!
Li - inside lenght, Ld - pitch length, La - outside length, Le - effective length. Timing belts z = no. of teeth.
This standardized product may come from different manufacturers. We will provide you with the currently supplied brand upon request.
In the TYMA Product Catalogues you can find this material also described with the abbreviation AL.
Clamping Plate Description
T20-100 pro ozubený řemen (106 × 160 mm) mechanically secure the free belt ends of the open-ended belts to the machine base.
The basic types are according to different profiles and standard widths. They are made of aluminum alloy.
Clamping Plate Fields of Use
They are used in all types of linear and lifting applications.
For standard applications a minimum of 7 teeth in clamp is recommended. For use with timing belts with special cords (e.g. HPL), a minimum of 12 teeth in clamp is recommended.
Clamping Plate Material
Aluminium alloy.
| Parameter | Standard |
|---|---|
| Surface roughness | ISO 254 |
Clamping Plate Basic Profile
Clamping plates are determined by the profile
- T5, T10 and T20 for belts in metric sizes with T profiles
- AT5, AT10 and AT20 for belts in metric sizes with AT profiles
- XL, L and H or belts in inch sizes
- 5M, 8M and 14M for belts in metric sizes with HTD profiles
Notice
Except standard clamping plates, there are
- Clamping plates with extended length
- Clamping plates without pre-drilled holes
- Semi-finished products for customized clamping plates
Documents for Download
Dimensions and Parameters of Timing Belts Clamping Plates
TYMA CZ Data Sheets
Czech and English (PDF 130.33 kB)

