česky | english
TYMA CZ
belts and
transmission systems
Shopping basket is empty

T20-25 pro ozubený řemen (56 × 160 mm)

Clamping Plate

T20-25 pro ozubený řemen (56 × 160 mm)

Price on request The clamping plate price is calculated after receiving information about availability and up-to-date prices from our suppliers. Please, write down required amount and send a Question about the Product or just order the clamping plates. The price and shipping conditions will be sent on your e-mail address. After your confirmation the goods will be ordered from the supplier.

The product is custom-made from a semi-finished product. It cannot be returned or replaced. In accordance with the provisions of § 1837, letter d) of Act No. 89/2012 Coll., the Civil Code (hereinafter referred to as the “Civil Code”), the consumer may not withdraw from a contract of purchase in the sense of the provisions of § 2079 et seq. of the Civil Code, if it concerns a contract on delivery of goods that have been adjusted by request of the consumer or for the consumer, concluded by means of remote communication.

In stock: no

Clamping Plate Parameters

Profile: T20 Profile
Multiple belts: profile – no. of ribs. Caution! The number of ribs refers to the number of belt protrusions = the number of teeth on the pulley!
Délka L2 (mm): - Length L
Li - inside lenght, Ld - pitch length, La - outside length, Le - effective length. Timing belts z = no. of teeth.
Brand: - Brand: -
This standardized product may come from different manufacturers. We will provide you with the currently supplied brand upon request.
Length Ld (mm): 160,00
Width (mm): 56,00
Material: Aluminium Alloy Material
In the TYMA Product Catalogues you can find this material also described with the abbreviation AL.

Clamping Plate Description

T20-25 pro ozubený řemen (56 × 160 mm) mechanically secure the free belt ends of the open-ended belts to the machine base.

The basic types are according to different profiles and standard widths. They are made of aluminum alloy.

Clamping Plate Fields of Use

They are used in all types of linear and lifting applications.

For standard applications a minimum of 7 teeth in clamp is recommended. For use with timing belts with special cords (e.g. HPL), a minimum of 12 teeth in clamp is recommended.

Clamping Plate Material

Aluminium alloy.

Parameter Standard
Surface roughness ISO 254

Clamping Plate Basic Profile

Clamping plates are determined by the profile

  • T5, T10 and T20 for belts in metric sizes with T profiles
  • AT5, AT10 and AT20 for belts in metric sizes with AT profiles
  • XL, L and H or belts in inch sizes
  • 5M, 8M and 14M for belts in metric sizes with HTD profiles

Notice

Except standard clamping plates, there are 

  • Clamping plates with extended length
  • Clamping plates without pre-drilled holes
  • Semi-finished products for customized clamping plates

Documents for Download

Dimensions and Parameters of Timing Belts Clamping Plates - Preview

Dimensions and Parameters of Timing Belts Clamping Plates

TYMA CZ Data Sheets

Czech and English (PDF 130.33 kB)

Pulleys and Clamping Bushes - Preview

Pulleys and Clamping Bushes

TYMA CZ Catalogue

Czech and English (PDF 3.64 MB)


Question about the Product
Antispam

If you submit the form, we will use your personal data (name, surname, email) to reply to your inquiry or question. All important information can be found in the Privacy Policy.