DSTD DS8M-512-85
Double-Sided Timing Belt
Belt Parameters
Profile:
STD S08MDD
Profile
Multiple belts: profile – no. of ribs. Caution! The number of ribs refers to the number of belt protrusions = the number of teeth on the pulley!
Multiple belts: profile – no. of ribs. Caution! The number of ribs refers to the number of belt protrusions = the number of teeth on the pulley!
Délka L2 (mm):
z=64
Length L
Li - inside lenght, Ld - pitch length, La - outside length, Le - effective length. Timing belts z = no. of teeth.
Li - inside lenght, Ld - pitch length, La - outside length, Le - effective length. Timing belts z = no. of teeth.
Brand:
-
Brand: -
This standardized product may come from different manufacturers. We will provide you with the currently supplied brand upon request.
This standardized product may come from different manufacturers. We will provide you with the currently supplied brand upon request.
Length Ld (mm):
512,00
Width (mm):
85,00
Material:
CR - Neoprene Rubber
Material
In the TYMA Product Catalogues you can find this material also described with the abbreviation CR.
In the TYMA Product Catalogues you can find this material also described with the abbreviation CR.
Belt Description
DSTD DS8M-512-85 is a double-sided timing belt that is intended for drives with change of direction of rotation. It can be used it in all performance areas.
The standard design allows economical solutions for double-sided synchronous power transmission in the lower and middle power range.
Belt Construction
- Polyamide fabric
- Synthetic rubber teeth
- Glass cord tension member
- Synthetic rubber backing
Belt Fields of Use
The double-sided timing belts profile DSTD DS8M are suitable for synchronous drives with same-sense and counterrotating motion. They allow compact space and weight-saving drives with an efficiency of up to 98 %.
Belt Characteristics
- High transmission power and long life
- Conditionally resistant to oil
- Suitable for tropical climates
- Electrical conductivity according to ISO 9563 for high performance variants
- Temperature range depending on application, from −20 °C to +100 °C
Documents for Download
Dimensions and Parameters of DSTD DS8M Timing Belts
TYMA CZ Data Sheets
Czech and English (PDF 372.53 kB)
Related Products
Antistatic – for compliance with requirements to ISO 9563.
The trendsetters with less polycyclic aromatic hydrocarbons (PAH) for clean operation and protection of persons in case of long-term contact with the belt.
CONTI SYNCHROTWIN CXP DS8M Double-Sided Timing Belts
CONTI SYNCHROTWIN CXP
Tooth pitch (mm): 8.0
Length range Lp (mm): 600 – 2392
STD S8M Standard Pilot Bore Timing Pulleys
Tooth pitch: 8.0 mm
Teeth z = 22 - 192
Diameters Dp (mm): 45.84 - 488.92
STD S8M Taper Lock Timing Pulleys
Tooth pitch: 8.0 mm
Teeth z = 22 - 192
Stand. diameters Dp (mm): 56.02 - 488.92
Measuring Instruments
Our professional-quality special tools and measuring instruments will assist you in maintaining and fitting drive components.
