STD 14M Polyurethane Open-Ended Timing Belts
STD 14M polyurethane open-ended timing belts in STD profile.
They are manufactured with the teeth and bottom from thermoplastic polyurethane with excellent wear resistance and with high tensile strength steel tension member, in special cases with kevlar or stainless steel tension member. The open-ended belts can be welded into endless belts.
We are sorry, but there are no products offered in this category at the moment.
Please enter desired item, design and quantity, and you can send queries using the Inquiry form below.
- Polyurethane teeth
- Steel cord tension member
- Polyurethane backing
Belts Fields of Use
Polyurethane timing belts are used in all areas, from miniature drives, high-precision positioning and sorting mechanisms, small handheld machines to high-performance drives for building and woodworking machines.
- High transmission power and long life
- Resistant to oil, fuel, benzol, UV radiation and ozone
- Temperature range, depending on application, from −30 °C to +80 °C
Belts Code Description
STD 14M - 115 - XHP PAZ CONTI SYNCHRODRIVE (black)
Tooth pitch in mm
Belt width in mm
Extra high power
Surface layer - fabric on tooth side
|CONTI SYNCHRODRIVE (black)||
Type of belt
|HP||High power tensile-strength|
|XHP||Very high power tensile-strength|
|XHPII||Extremely high power tensile-strength|
|HS||High stiffness of tension member|
|HSII||Very high stiffness of tension member|
|HP-Niro||Stainless steel tension fibers|
|Aramid||Aramid tension fibers|
Optional Belt Surface Layers
The choice of the surface layer depends on the type of machine, the ambient temperature, the size of the pulleys, etc. Specifying the surface layer is determined by the material and the thickness of the layer.
|Layer Name||Material||Layer Illustration|
|PAZ (NFT) - nylon fabric on teeth
Low coefficient of friction
|PAR (NFB) - nylon fabric on back
|PAZ + PAR (NFT + NFB) - fabric on teeth and back
Low coefficient of friction and surface protection
The fabric on teeth and back can be combined with all other layers. A complete range of belt surface layers
The most common color of open-ended polyurethane belts with steel tension member is white. ContiTech also offers these belts in black.
Basic HP belts have the same characteristics as white belts. The color is the only difference. Black color is required for some applications due to its design or greater light fastness. White color changes over time - it turns yellow. In addition, any spots are more noticeable on white.
Reinforced types XHP, XHPII, HS and HSII are mostly produced by ContiTech only in black.
Documents for Download
TYMA CZ Data Sheets
Czech and English (PDF 447.48 kB)
TYMA CZ Catalogue
Czech and English (PDF 4.54 MB)
English and German (PDF 4.88 MB)