Search Eshop Category Tree
CZK | EUR
česky CS | english EN
belts and
transmission systems
Shopping basket is empty

Polyurethane Welded Timing Belts

Welded timing belts are polyurethane endless conveyor timing belts manufactured from standard open-ended belts. They are joined under heat on special machines.

Open-ended belts with steel, aramid or stainless steel tensile fibers are prepared to the required size, where a "V"-shaped joint with fingers is cut at both ends, and after being inserted into a precise mold, is joined at a given temperature into an endless belt.

Various surface layers and attachments can be welded or glued on the belts.

Polyurethane Welded Timing Belt

If you submit the form, we will use your personal data (name, surname, email) to reply to your inquiry or question. All important information can be found in the Privacy Policy.

Belts Construction

Ready for Weld Connection Belt Construction

  1. Open-ended polyurethane belt
  2. Belt cut and ready for welding

Belts Fields of Use

Polyurethane welded timing belts are used in all areas of industry as transport timing belts, in linear drives, positioning and lifting devices.

They are most commonly used in conveyors in the glass, ceramic, food, automotive or woodworking industries, in distribution centres, in packaging machines and many other devices.

Belts Characteristics

  • High transmitted power and long service life
  • Resistant to oil, petrol, benzene, UV radiation and ozone
  • Abrasion-resistant
  • Maintenance-free
  • Temperature range, depending on application, from −30 °C to +80 °C

Belts Code Description

Example:
T10 - 50 - 8920 V + Linatex 2.0 mm

Code Part Description
T

Profile

10

Toth pitch in mm

50

Belt width in mm

8920

Belt length in mm

V

Welded

Linatex 2.0 mm

Surface layer

Notice

Welded polyurethane toothed timing belts are produced in many profiles.

According to the profile, the minimum length is about 700 mm, the maximum length is not limited.

Optional Belt Surface Layers

The choice of the surface layer depends on the type of machine, the ambient temperature, the size of the pulleys, etc. Specifying the surface layer is determined by the material and the thickness of the layer.

Layer Name Material Layer Illustration
PAZ (NFT) - nylon fabric on teeth
Low coefficient of friction
Nylon PAZ (nylon fabric on teeth)
PAR (NFB) - nylon fabric on back
Surface protection
Nylon PAZ (nylon fabric on back)
PAZ + PAR (NFT + NFB) - fabric on teeth and back
Low coefficient of friction and surface protection
Nylon PAZ PAR (fabric on teeth and back)

The fabric on teeth and back can be combined with all other layers. A complete range of belt surface layers

Documents for Download

Dimensions and Parameters of Polyurethane Joined Endless Timing Belts - Preview

Dimensions and Parameters of Polyurethane Joined Endless Timing Belts

TYMA CZ Data Sheets

Czech and English (PDF 196.24 kB)

Drive Belts - Preview

Drive Belts

TYMA CZ Catalogue

Czech and English (PDF 4.54 MB)

CONTI SYNCHRODRIVE - Preview

CONTI SYNCHRODRIVE

ContiTech Catalogue

English and German (PDF 4.88 MB)


Question about the Belts Category

Do not hesitate to contact us with any questions about products in this category.

Ask Our Specialists
Antispam

If you submit the form, we will use your personal data (name, surname, email) to reply to your inquiry or question. All important information can be found in the Privacy Policy.