Search Eshop Category Tree
CZK | EUR
česky CS | english EN
belts and
transmission systems
Shopping basket is empty

CONTI-V FO PIONEER V-Belts

CONTI-V FO PIONEER narrow V-belts with high transverse stiffness for permanent and reliable transmission of high powers and revolutions are cut according to ISO 4184 (DIN 7753).

The belts are made of highly resistant EPDM rubber compound with temperature resistance up to 130 °C, reinforced with special tension member. Their optimized flanks provide better friction coefficient and up to 3x higher performance than conventional belts.

CONTI-V FO PIONEER XPZ/3VX V-Belts - Preview
Low electrical conductivityLow electrical conductivity – for compliance with requirements to ISO 1813. Less PAHThe trendsetters with less polycyclic aromatic hydrocarbons (PAH) for clean operation and protection of persons in case of long-term contact with the belt.

XPZ/3VX

CONTI-V FO PIONEER
Profile b× h (mm): 9.7 × 8.0
Length range Ld (mm): 590 - 3550
CONTI-V FO PIONEER XPA V-Belts - Preview
Low electrical conductivityLow electrical conductivity – for compliance with requirements to ISO 1813. Less PAHThe trendsetters with less polycyclic aromatic hydrocarbons (PAH) for clean operation and protection of persons in case of long-term contact with the belt.

XPA

CONTI-V FO PIONEER
Profile b× h (mm): 12.7 × 9.0
Length range Ld (mm): 590 - 4500
CONTI-V FO PIONEER XPB/5VX V-Belts - Preview
Low electrical conductivityLow electrical conductivity – for compliance with requirements to ISO 1813. Less PAHThe trendsetters with less polycyclic aromatic hydrocarbons (PAH) for clean operation and protection of persons in case of long-term contact with the belt.

XPB/5VX

CONTI-V FO PIONEER
Profile bo × h (mm): 16.3 × 13.0
Length range Ld (mm): 1900 - 5000
(over 5000 mm only in CONTI V FO ADVANCE)
CONTI-V FO PIONEER XPC V-Belts - Preview
Low electrical conductivityLow electrical conductivity – for compliance with requirements to ISO 1813. Less PAHThe trendsetters with less polycyclic aromatic hydrocarbons (PAH) for clean operation and protection of persons in case of long-term contact with the belt.

XPC

CONTI-V FO PIONEER
Profile b× h (mm): 22.0 × 16.0
Length range Ld (mm): 2000 - 5000
(over 5000 mm only in CONTI V FO ADVANCE)

Belts Construction

CONTI-V FO PIONEER Belt Structure

  1. Fiber-reinforced EPDM rubber bottom section
  2. Embedding compound
  3. Polyester tension member
  4. Cotton cover fabric

Belts Fields of Use

The CONTI-V FO PIONEER heavy-duty V-belts meet the strongent requiremets of modern drive technology and pave the way for new applications in all areas of mechanical engineering from precision mechanics to heavy machine construction.

Typical application fields include compressors, blowers, machine tools, paper and chemical industry and many other areas.

Belts Characteristics

  • Temperature range from −40 °C to +130 °C
  • Very good flexibility thanks to molded teeth
  • High dynamic stability
  • Design L = L - constant tolerance of belts in the set, minimum extension
  • Electrically conductive to ISO 1813
  • Conditionally resistant to oil
  • Suitable for tropical climates
  • Dust-proof
  • Maintenance-free
  • Low in PAHs - category 2 according to AfPS-GS-2014-01-PAK
  • Power increased by 5.5 %
  • Enhanced durability thanks to more abrasion-resistant compound

Belts Code Description

Example:
XPB 1250 Ld / 5VX 495 CONTI-V FO PIONEER

Code Part Description
XPB

Profile

1250 Ld

Nominal lenght in mm

5VX

Profile

495

Outside lenght in inches (1257,30 mm)

CONTI-V FO PIONEER

Type of belt

Belts Certification

Notice

General factory certificates are not sufficient for belts used in potentially explosive atmospheres.

If a test report according to ISO 1813 and ISO 9563 is required for the application, it is necessary to inform us of the request for delivery of belts including the certificate when ordering them (when ordering belts via Eshop, please write this request in the "Note" field before by sending the order). The certificate is issued by ContiTech after the test in the production plant.

more information

Documents for Download

Dimensions and Parameters of CONTI-V FO PIONEER V-Belts - Preview

Dimensions and Parameters of CONTI-V FO PIONEER V-Belts

TYMA CZ Data Sheets

Czech and English (PDF 276.16 kB)

Drive Belts - Preview

Drive Belts

TYMA CZ Catalogue

Czech and English (PDF 4.54 MB)

CONTI-V - Preview

CONTI-V

ContiTech Catalogue

English and German (PDF 4.25 MB)

CONTI-V FO PIONEER - Preview

CONTI-V FO PIONEER

ContiTech Catalogue

English and German (PDF 826.05 kB)

Rubber Products Optional Services Price List - Preview

Rubber Products Optional Services Price List

TYMA CZ Product Overview

Czech and English (PDF 500.38 kB)


Ask Our Specialists
Antispam

If you submit the form, we will use your personal data (name, surname, email) to reply to your inquiry or question. All important information can be found in the Privacy Policy.

Belt Manufacturer Profile

Continental

Continental is the world’s largest specialist for rubber and plastics technology in the non-tire rubber sector. A division of Continental AG, the company develops and produces functional parts, components and systems for the automotive and other important industries.

ContiTech importance on immediate proximity to customers. ContiTech is active in 26 countries with 75 production sites and more than 40 R&D facilities and sales organizations. The customers around the world stand to profit: Greater safety. Higher efficiency. Closer proximity.

TYMA CZ, s.r.o., is the official distributor of Continental ContiTech Power Transmission Group.

more information about manufacturer