V-Belts (Single)
Single (non-banded) V-belts are the most basic type of V-belts. They are used to transmit power or rotational speed from the driving pulley to the driven pulley. V-belt drives may allow a certain amount of slippage.
Low electrical conductivity – for compliance with requirements to ISO 1813.
The trendsetters with less polycyclic aromatic hydrocarbons (PAH) for clean operation and protection of persons in case of long-term contact with the belt.
CONTI VX ADVANCE / CONTI-V FO PIONEER (EPDM)
Narrow V-belts with internal toothing cut from EPDM rubber in XPZ/3VX, XPA, XPB/5VX, XPC and 8VX profiles for highest power and revolutions, with the highest temperature resistance (formerly CONTI-V FO PIONEER).
Low electrical conductivity – for compliance with requirements to ISO 1813.
CONTI V (Narrow)
Narrow V-belts in SPZ/3V, SPA, SPB/5V, SPC and 8V profiles for increased power and revolutions.
Low electrical conductivity – for compliance with requirements to ISO 1813.
CONTI V (Classic)
Classic V-belts wrapped according to ISO 4184 (DIN 2215)
Low electrical conductivity – for compliance with requirements to ISO 1813.
CONTI V ADVANCE (Reinforced)
Narrow V-belts with reinforced tensile member and advanced compound, wrapped according to ISO 4184 (DIN 7753) for increased power transmission
Low electrical conductivity – for compliance with requirements to ISO 1813.
CONTI V SUPREME (Reinforced)
Narrow V-belts with aramid tensile member and advanced compound, wrapped according to ISO 4184 (DIN 7753) for the highest loads (formerly CONTI-V POWER).
Low electrical conductivity – for compliance with requirements to ISO 1813.
CONTI VX (Toothed)
Classical V-belts with internal teeth cut according to the ISO 4184 (DIN 2215) for higher power and speed transmission (formerly CONTI-V FO)
BANDO BANCOLLAN (Toothed)
Polyurethane V-belts with internal teeth for use on pulleys with a minimum diameter of 16 mm
Low electrical conductivity – for compliance with requirements to ISO 1813.
CONTI VX VARISPEED ADVANCE (Variable Speed)
Variable speed V-belts for variators, i.e. for drives with continuous speed change
Low electrical conductivity – for compliance with requirements to ISO 1813.
CONTI VX VARISPEED SUPREME (Reinforced Variable Speed)
Variable speed V-belts for the highest power and speed transmission (formerly CONTI-V VARISPEED POWER)