HTD 8M-1760-43 PK-12 CXP CONTI SYNCHRORIB (1760 H8M CXP PK12)
Double-Sided Combined Belt
Antistatic – for compliance with requirements to ISO 9563.
The trendsetters with less polycyclic aromatic hydrocarbons (PAH) for clean operation and protection of persons in case of long-term contact with the belt.
Price without VAT: 110.08€
Price including VAT: 133.19€ with VAT
Catalogue price excluding VAT:
112.29€
The product is custom-made from a semi-finished product. It cannot be returned or replaced. In accordance with the provisions of § 1837, letter d) of Act No. 89/2012 Coll., the Civil Code (hereinafter referred to as the “Civil Code”), the consumer may not withdraw from a contract of purchase in the sense of the provisions of § 2079 et seq. of the Civil Code, if it concerns a contract on delivery of goods that have been adjusted by request of the consumer or for the consumer, concluded by means of remote communication.
At supplier, on request Estimated time of shipping will be announced after receiving information from our suppliers. Please, write down required amount and send a Question about the Product or just order the belt. The shipping conditions will be sent on your e-mail address. After your confirmation the goods will be ordered from the supplier.
Specifications
Pitch length of the belt. It is commonly denoted as Lp or Lp.
In the TYMA Product Catalogues you can find this material also described with the abbreviation CR+GLASS.
Belt Description
HTD 8M-1760-43 PK-12 CXP CONTI SYNCHRORIB (1760 H8M CXP PK12) is a combined double-sided drive belt. One its side consists of a timing belt (SYNCHRO) with an HTD 8M profile, while the other side is a poly-V belt (RIB) in PK profile with a rib spacing of 3.56 mm. The timing belt ensures precise synchronous motion, and the ribbed side allows limited slippage under shock loading.
The belt is made of a highly durable synthetic rubber compound with glass-cord tension member and teeth protected by a special polyamide fabric.
Construction
- Polyamide fabric
- Synthetic rubber teeth
- Glass-cord tension member
- Synthetic rubber ribs
Typical Applications
CONTI SYNCHRORIB belts have been specifically developed for driving mill table rollers. These rollers, which are grinding elements, rotate against each other at varying circumferential speeds.
These combined drive belts serve as an excellent alternative to double-sided timing belts, which are not only costly but also more susceptible to damage due to overloading and uneven loading.
Mill tables are primarily designed for grinding dry bulk materials. While they are mainly used for grinding grain in mills and feedstuffs, they can also be utilized for grinding corn, rice, chalk, certain spices, and chemical products, as well as for waste cleaning.
Properties
- Timing belts allowing minor slippage on the ribbed side
- Temperature range depending on application, from −20 °C to +100 °C
- Antistatic property according to ISO 9563
- Moderately oil resistant
- Ageing and ozone resistant
- Suitable for tropical climates
- Maintenance-free
- Low in PAHs – category 2 according to AfPS-GS-2014-01-PAK (for CXP and CXA design)
Certificates
- Factory Electrical Conductivity Certificate of Belts According to ISO 1813 and ISO 9563 (pdf, 104.90 kB)
- ContiTech Explanation of ATEX Certification (pdf, 11.96 kB)
Notice
General factory certificates are not sufficient for belts used in potentially explosive atmospheres.
If a test report according to ISO 1813 and ISO 9563 is required for the application, it is necessary to inform us of the request for delivery of belts including the certificate when ordering them (when ordering belts via Eshop, please write this request in the "Note" field before by sending the order). The certificate is issued by ContiTech after the test in the production plant.
Documents for Download
Related Products
DHTD D8M Double-Sided Timing Belts
Antistatic – for compliance with requirements to ISO 9563.
The trendsetters with less polycyclic aromatic hydrocarbons (PAH) for clean operation and protection of persons in case of long-term contact with the belt.
CONTI SYNCHROTWIN CXP D8M Double-Sided Timing Belts
HTD Taper Lock Timing Pulleys
HTD taper bore timing pulleys – 5M, 8M, 14M for all timing belts HTD a RPP.
Measuring Instruments for Belt and Chain Drives
Our professional-quality special tools and measuring instruments will assist you in maintaining and fitting drive components.
Questions about This Product?
Don’t hesitate to contact us – our specialists will be happy to help with any questions about this belt.
Belt Manufacturer Profile
Continental is the world’s largest specialist for rubber and plastics technology in the non-tire rubber sector. A division of Continental AG, the company develops and produces functional parts, components and systems for the automotive and other important industries.
ContiTech importance on immediate proximity to customers. ContiTech is active in 26 countries with 75 production sites and more than 40 R&D facilities and sales organizations. The customers around the world stand to profit: Greater safety. Higher efficiency. Closer proximity.
TYMA CZ, s.r.o., is the official distributor of Continental ContiTech Power Transmission Group.