CONTI VX TORQUE TEAM Reinforced Toothed Banded V-Belts
CONTI VX TORQUE TEAM (formerly CONTI-V MULTIBELT FO) banded V-belts are made by joining individual belts into a single wide belt. They are based on higher-performance cut V-belts with ground sides and internal teeth, specifically CONTI VX (formerly CONTI-V FO).
They are made of a fiber-reinforced rubber compound and high-strength polyester tension member. Compared to standard banded V-belts like CONTI V TORQUE TEAM (formerly CONTI-V MULTIBELT), they offer higher power transmission, greater precision, lower elongation, and higher temperature resistance. The cover band increases belt stiffness and prevents twisting.
Low electrical conductivity – for compliance with requirements to ISO 1813.
CONTI-V MULTIBELT FO Changes to CONTI VX TORQUE TEAM
The Continental CONTINUITY project is globally standardizing belt names and performance series across the entire ContiTech portfolio.
High-performance banded V-belts, previously sold under the CONTI-V MULTIBELT FO designation, are now produced with a new print design and a new name: CONTI VX TORQUE TEAM.
The belts remain unchanged in terms of technology and performance. The materials used stay the same. No modifications are needed to the machine construction, mounting method, preload setting, or operation.
Belts Construction
- Synthetic rubber bottom section
- Polyester tension member
- Synthetic rubber backing
- Cotton cover fabric
Belts Fields of Use
CONTI VX TORQUE TEAM banded V-belts are used in heavily loaded machines in specialized applications.
They are typically found in construction machines, asphalt milling machines, and crushers, as well as in buses and trucks.
They are also used in other applications with non-uniform loads and high operating temperatures.
Belts Characteristics
- Increased load transfer, long service life
- Increased resistance to shocks and uneven loads
- Small pulley diameters and small overall drive dimensions
- Excellent flexibility, quiet and smooth operation
- Resistance to oil and other chemicals
- Temperature resistance from −30 °C to +70 °C
- Antistatic properties according to ISO 1813
Belts Code Description
Example:
2-XPB 2450 Ld CONTI VX TORQUE TEAM (Formerly CONTI-V MULTIBELT FO)
| Code Part | Description |
|---|---|
| 2 |
2-Banded |
| XPB |
Profile |
| 2450 Ld |
Nominal length in mm |
| CONTI VX TORQUE TEAM |
Type of belt |
| Formerly CONTI-V MULTIBELT FO |
CONTI VX TORQUE TEAM belts were sold for many years under the CONTI-V MULTIBELT FO brand name |
Belts Certification
- Factory Electrical Conductivity Certificate of Belts According to ISO 1813 and ISO 9563 (pdf, 104.90 kB)
- ContiTech Explanation of ATEX Certification (pdf, 11.96 kB)
Notice
General factory certificates are not sufficient for belts used in potentially explosive atmospheres.
If a test report according to ISO 1813 and ISO 9563 is required for the application, it is necessary to inform us of the request for delivery of belts including the certificate when ordering them (when ordering belts via Eshop, please write this request in the "Note" field before by sending the order). The certificate is issued by ContiTech after the test in the production plant.
Documents for Download
Related Products
Low electrical conductivity – for compliance with requirements to ISO 1813.
CONTI V TORQUE TEAM Narrow-Section Banded V-Belts
Banded V-belts in narrow SPZ, SPA, SPB, SPC, 3V/9J, 5V/15J, and 8V/25J profiles (formerly CONTI-V MULTIBELT)
Low electrical conductivity – for compliance with requirements to ISO 1813.
The trendsetters with less polycyclic aromatic hydrocarbons (PAH) for clean operation and protection of persons in case of long-term contact with the belt.
CONTI VX ADVANCE V-Belts
Narrow V-belts with internal toothing cut from EPDM rubber in XPZ/3VX, XPA, XPB/5VX, XPC and 8VX profiles for highest power and revolutions, with the highest temperature resistance (formerly CONTI-V FO PIONEER).
V-Belt Pulleys for Taper Lock Bushes
Taper Lock SPZ, SPA, SPB, SPC V-belt pulleys for all sorts of V-belts and banded belts SPZ, SPA, SPB, SPC.
Measuring Instruments
Our professional-quality special tools and measuring instruments will assist you in maintaining and fitting drive components.
Question about the Belts Category
Do not hesitate to contact us with any questions about products in this category.
Belt Manufacturer Profile
Continental is the world’s largest specialist for rubber and plastics technology in the non-tire rubber sector. A division of Continental AG, the company develops and produces functional parts, components and systems for the automotive and other important industries.
ContiTech importance on immediate proximity to customers. ContiTech is active in 26 countries with 75 production sites and more than 40 R&D facilities and sales organizations. The customers around the world stand to profit: Greater safety. Higher efficiency. Closer proximity.
TYMA CZ, s.r.o., is the official distributor of Continental ContiTech Power Transmission Group.