4-SPC 7500 Ld ADVANCE CONTI-V MULTIBELT
Banded V-Belt
Low electrical conductivity – for compliance with requirements to ISO 1813.
Price without VAT: 1,608.09€
Price including VAT: 1,945.79€ with VAT
Catalogue price excluding VAT:
1,640.89€
At supplier, on request Estimated time of shipping will be announced after receiving information from our suppliers. Please, write down required amount and send a Question about the Product or just order the belt. The shipping conditions will be sent on your e-mail address. After your confirmation the goods will be ordered from the supplier.
Belt Parameters
Multiple belts: profile – no. of ribs. Caution! The number of ribs refers to the number of belt protrusions = the number of teeth on the pulley!
Li - inside lenght, Ld - pitch length, La - outside length, Le - effective length. Timing belts z = no. of teeth.
In the TYMA Product Catalogues you can find this material also described with the abbreviation CR.
Belt Description
4-SPC 7500 Ld ADVANCE CONTI-V MULTIBELT is a banded V-belt created by joining individual V-belts into one wide strip. Unlike the regular basic CONTI-V MULTIBELT types, it is made of a special fiber-reinforced mixture of rubber and reinforced tensile fiber. It is characterized by increased transmitted power and longer life, higher impact resistance, higher transverse stiffness and high temperature and chemical resistance. It is wrapped according to ISO 4184 (DIN 7753).
The banded V-belts are used to eliminate vibrations in the individual belts, on drives with significant impacts as well as highly irregular loads and on drives with large center distances.
Belt Construction
- Fabric jacket
- Fiber-reinforced synthetic rubber bottom section
- Polyester tension member
- Fiber-reinforced synthetic rubber backing
Belt Fields of Use
CONTI-V MULTIBELT ADVANCE banded V-belts find use in heavy-duty machines in all industries, especially in agricultural machines, machine tools, crushers, fans, in the paper industry, in cement plants, in power plants, in mines and in other cases where a non-uniform load is transmitted at large axial distances.
Belt Characteristics
- Transmission of increased load, smooth, quiet operation, long service life
- Increased resistance to shocks and uneven loads
- Resistance to oil and other chemicals
- Temperature resistance from −40 °C to +80 °C
- Antistatic properties according to ISO 1813
Belt Certification
- Factory Electrical Conductivity Certificate of Belts According to ISO 1813 and ISO 9563 (pdf, 104.90 kB)
- ContiTech Explanation of ATEX Certification (pdf, 11.96 kB)
Notice
General factory certificates are not sufficient for belts used in potentially explosive atmospheres.
If a test report according to ISO 1813 and ISO 9563 is required for the application, it is necessary to inform us of the request for delivery of belts including the certificate when ordering them (when ordering belts via Eshop, please write this request in the "Note" field before by sending the order). The certificate is issued by ContiTech after the test in the production plant.
Documents for Download
Related Products
Low electrical conductivity – for compliance with requirements to ISO 1813.
CONTI-V MULTIBELT SPC Banded V-Belts
Low electrical conductivity – for compliance with requirements to ISO 1813.
The trendsetters with less polycyclic aromatic hydrocarbons (PAH) for clean operation and protection of persons in case of long-term contact with the belt.
CONTI VX ADVANCE XPC V-Belts
SPC Taper Lock V-Belt Pulleys
Diameter Dm (mm): 160 - 1250
Measuring Instruments
Our professional-quality special tools and measuring instruments will assist you in maintaining and fitting drive components.
Belt Manufacturer Profile
Continental is the world’s largest specialist for rubber and plastics technology in the non-tire rubber sector. A division of Continental AG, the company develops and produces functional parts, components and systems for the automotive and other important industries.
ContiTech importance on immediate proximity to customers. ContiTech is active in 26 countries with 75 production sites and more than 40 R&D facilities and sales organizations. The customers around the world stand to profit: Greater safety. Higher efficiency. Closer proximity.
TYMA CZ, s.r.o., is the official distributor of Continental ContiTech Power Transmission Group.
