Belt and Chain Aligners
Belt and chain aligners are electronic devices for setting and checking alignment – the correct position of pulleys or sprockets. It is performed at rest with the transmission stopped.
It is measured using a flat beam laser that shows the exact amount of angular deviation or misalignment of pulleys and wheels.
Correct positioning of the actuators is a prerequisite for trouble-free operation and a long service life.
Products are sorted according to their interrelationship and expected interest in descending order.
CONTI LASER ALIGNER Belt Aligner
Measuring Instrument
In Stock We update the stock availability information every 2 hours.
The goods we have in stock are usually ready for shipping or personal collection no later than the next working day. In case of personal collection, please do not come to pick the goods up before we contact you that the goods are ready.
10 639,60CZK excl. VAT
12 873,90CZK incl. VAT
LASER ALIGNER Belt Aligner - Spare Part Target Magnet
Measuring Instrument
In Stock We update the stock availability information every 2 hours.
The goods we have in stock are usually ready for shipping or personal collection no later than the next working day. In case of personal collection, please do not come to pick the goods up before we contact you that the goods are ready.
312,90CZK excl. VAT
378,60CZK incl. VAT
Products are sorted according to their interrelationship and expected interest in descending order.
Instruments Fields of Use
Alignment gauges are intended for setting the correct position during assembly and during operation of belt and chain transmissions. Using these gauges, we can easily and accurately set the required values for individual types of transmissions.
They are used in all industries.
Electronic devices for setting and checking the correct position of pulleys or sprockets.
Related Products
Belt Tension Gauges
Mechanical or electronic devices designed to measure pretension during assembly and operation of timing belts, poly-V-belts, V-belts, and flat belts.
Low electrical conductivity – for compliance with requirements to ISO 1813.
The trendsetters with less polycyclic aromatic hydrocarbons (PAH) for clean operation and protection of persons in case of long-term contact with the belt.
CONTI VX ADVANCE V-Belts
Narrow V-belts with internal toothing cut from EPDMSynthetic Ethylene Propylene Diene Monomer rubber rubber in XPZ/3VX, XPA, XPB/5VX, XPC and 8VX profiles for highest power and revolutions, with the highest temperature resistance (formerly CONTI-V FO PIONEER).
CONTI SYNCHROCHAIN CARBON Timing Belts
Reinforced polyurethane timing belts for the transmission of the highest power, torque, and dynamic loads in CTDConti Torque Drive
The CTD profile is a symbiosis of the HTD and STD profiles, combining the benefits of both tooth geometries. The tooth height and width correspond to that of the HTD profile for transmitting extremely high torques and preventing jump-over at the same time, while the involute-shaped flank ensures very smooth running. profiles
Antistatic – for compliance with requirements to ISO 9563.
CONTI SILENTSYNC Self-Tracking Timing Belts
Self-tracking timing belts with helical offset teeth designed for very quiet transmissions with extremely low vibrations in H.O.T.Helical Offset Tooth
The helical toothing of the H.O.T. profile delivers a degree of operational smoothness unrivaled by other timing belts The noise level can be reduced by up to 19 dB, and the polygon effect is almost eliminated, resulting in up to 20% lower vibrations. The profile’s offset toothing means the belt is also self-tracking: Flanges are not necessary, as a result of which the width of the system can be reduced. profiles
CONTI SYNCHROFLEX GEN III Heavy-Duty Timing Belts
Polyurethane belts with enhanced power transmission and durability in ATThe AT profile is a further development of the T (Trapezprofil) profile. The teeth have a higher load capacity because of the increased tooth volume. The optimized flank angle results in improved tooth meshing. Here, too, a play-free belt/sprocket pairing that results in unsurpassed precision can be achieved. profiles